 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Standard ICs Quad 2-channel analog multiplexer / demultiplexer BU4551B / BU4551BF / BU4551BFV The BU4551B, BU4551BF, and BU4551BFV are multiplexers / demultiplexers capable of selecting and combining analog signals and digital signals with a configuration of 2 ch x 4. Control signals are used to turn on the switch of the corresponding channel. In addition, even if the logical amplitude (VDD-VSS) of the control signal is low, signals with a large amplitude (VDD-VEE) can be switched. In addition, as each switch has a low ON resistance, it can be connected to a low impedance circuit. *Logic circuit diagram VDD (16) CONT (9) Level Converter Control *Block diagram W1 X0 1 2 W1 X0 X1 X (14)W Y (4) X (5) Y (13) Z Y0 6 5 4 X Y Y0 VEE CONTROL VEE 7 10 Y1 W0 W Z Z1 Z0 Y1 11 Z0 13 Z 16 VDD 15 W0 VSS VEE W1 X0 X1 Y0 (8) (7) (1) (2) (3) (6) X1 3 14 W W0 (15) 12 Z1 Y1 (10) Z0 (11) Z1 (12) VSS 8 9 CONTROL *Truth table CONTROL 0 1 ON W0 X0 Y0 Z0 W1 X1 Y1 Z1 1 Standard ICs BU4551B / BU4551BF / BU4551BFV *Absolute maximum ratings (VSS = 0V, Ta = 25C) Parameter Power supply voltage 1 Power supply voltage 2 Power dissipation Operating temperature Storage temperature Input voltage Symbol VDD - VEE VDD Pd Topr Tstg VIN Limits - 0.3 ~ + 18 - 0.3 ~ + 18 1000 (DIP), 500 (SOP), 400 (SSOP) - 40 ~ + 85 - 55 ~ + 150 - 0.3 ~ VDD + 0.3 Unit V V mW C C V *Electrical characteristics otherwise noted, Ta = 25C, VEE = VSS = 0V) DC characteristics (unless Parameter Symbol Min. 3.5 VIH 7.0 11.0 -- Input low-level voltage Input high-level current Input low-level current VIL -- -- IIH IIL -- -- -- ON resistance RON -- -- -- ON resistance deflexion OFF-channel leakage current Static current dissipation RON -- -- -- IOFF -- -- IDD -- -- Typ. -- -- -- -- -- -- -- -- -- -- -- 25 10 5 -- -- -- -- -- Max. -- -- -- 1.5 3.0 4.0 0.3 - 0.3 1100 500 280 -- -- -- 0.3 - 0.3 5 10 15 A A A A V V Unit VDD (V) 5 10 15 5 10 15 15 15 5 10 15 5 10 15 15 15 5 10 15 VI = VDD or GND -- -- Fig.3 -- Fig.2 VIN = VDD / 2 Fig.2 VIH = 15V VIL = 0V Fig.1 Fig.1 -- Fig.1 -- Fig.1 Conditions Measurement circuit Input high-level voltage 2 Standard ICs BU4551B / BU4551BF / BU4551BFV Switching characteristics (unless otherwise noted, Ta = 25C, VEE = VSS = 0V, RL = 10 k, CL = 50pF) Parameter Symbol Min. -- Propagation delay time Switch INOUT tPLH tPHL -- -- -- Propagation delay time CONTOUT tPZH tPHZ -- -- -- Propagation delay time CONTOUT Max. propagation frequency Feedthrough attenuation Sine wave distortion Input capacitance (control) Input capacitance (switch) tPZL tPLZ fMax. FT D CC CS -- -- -- -- -- -- -- Typ. 35 15 12 360 160 120 360 160 120 15 0.7 0.02 5 10 Max. -- -- -- -- -- -- -- -- -- -- -- -- -- -- MHz MHz % pF pF ns ns ns Unit Conditions Measurement circuit VDD (V) 5 10 15 5 10 15 5 10 15 -- -- -- -- -- -- Fig.4 -- Fig.5, 6 -- VEE = - 5V1 VEE = - 5V2 VEE = - 5V3 -- -- Fig.5, 6 Fig.7 Fig.7 Fig.7 -- -- 1 VIN = 5VP-P sine wave, frequency that enables 20 log10 VOUT / VIN = - 3dB 2 VIN = 5VP-P sine wave, frequency that enables 20 log10 VOUT / VIN = - 50dB at channel off 3 VIN = 5VP-P sine wave *Measurement circuits VDD VDD CONT IIN VIN VDD COMMON CHANNEL OUT / IN IN / OUT VDD or GND CONT RON = RL VIN VOUT -1 A VIN COMMON CHANNEL OUT / IN IN / OUT VEE V RL = 10k VEE VDD / 2 VOUT V RL = 10k GND GND Fig. 1 Input voltage, current Fig. 2 ON resistance 3 Standard ICs BU4551B / BU4551BF / BU4551BFV VDD VDD or GND CONT VDD or GND COMMON CHANNEL OUT / IN IN / OUT A GND or VDD VEE GND Fig. 3 OFF-channel leakage current VDD VDD or GND CONT VDD Input GND 50% COMMON CHANNEL OUT / IN IN / OUT Output RL CL 50% VEE P.G. GND tPLH tPHL Fig. 4 Propagation delay time (Switch IN to OUT) VDD VDD CONT Input GND 90% P.G. VDD COMMON CHANNEL OUT / IN IN / OUT 50% OUT Output 50% VEE RL CL tPZH GND tPHZ Fig. 5 Propagation delay time (CONT, INH to OUT) 4 Standard ICs BU4551B / BU4551BF / BU4551BFV VDD VDD CONT RL CL Input 50% P.G. GND COMMON CHANNEL OUT / IN IN / OUT OUT Output 50% 10% VEE GND tPZL tPLZ Fig. 6 Propagation delay time (CONT, INH to OUT) VDD VDD or GND CONT COMMON CHANNEL OUT / IN IN / OUT VEE ~ VEE RL CL ~ V D GND Fig. 7 Maximum propagation frequency, feedthrough attenuation, sine wave distortion *Electrical characteristic curve 1200 1000 800 POWER DISSIPATION: Pd (mW) DIP16 600 SOP16 400 SSOP-B16 200 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE: Ta (C) Fig. 8 Power dissipation vs. ambient temperature 5 Standard ICs BU4551B / BU4551BF / BU4551BFV *External dimensions (Units: mm) BU4551B BU4551BF 10.0 0.2 19.4 0.3 16 9 6.5 0.3 16 6.2 0.3 4.4 0.2 9 7.62 3.2 0.2 4.25 0.3 1 1.5 0.1 8 0.11 0.3 0.1 2.54 0.5 0.1 1.27 0.4 0.1 0.3Min. 0.15 0 ~ 15 DIP16 BU4551BFV SOP16 5.0 0.2 16 4.4 0.2 9 6.4 0.3 1.15 0.1 1 8 0.1 0.65 0.22 0.1 0.3Min. 0.1 SSOP-B16 6 0.15 0.1 0.15 0.1 1 0.51Min. 8 |
Price & Availability of BU4551BF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |